Special solution for customers whose applications are intended for use in defense systems and equipment in harsh environments. The galvanically isolated DC-DC converter can be used for various applications without the need for further filtering measures. A classic AUTRONIC plug-and-play solution.
Special features:
The wide input range from 9 V to 60 V helps to reduce the model variety for the customer. Whether you have a 12 V, 24 V or 48 V supply voltage in the vehicle, the ACM60/Ks is not impressed. Even short voltage peaks up to 80 V are swallowed.
Integrated is an active inrush current limiting according to DEF STAN 61-5 Part C Issue 6, with an enable signal the converter can be started or switched off. The output voltage is 12 VDC, protection against overcurrent, overvoltage and overtemperature secures the driven applications against overload.
The efficiency of the compact converter (147 mm x 35 mm x 46 mm) is up to 84 %, depending on the applied input voltage. A low weight of just under 400 gr, full EMC filtering and the temperature range of -40...100 °C are hallmarks of this sophisticated converter.
The ACM60 supports demanding EMC requirements, details can be found in the listing below, as well as environmental requirements.
Summary:
- Input: 9 V to 60 V and 80 V ≤1.0 sec.
- Output: 12 VDC
- Power: 60 W
- Temperature: -40 °C to 100 °C, with shredding to -55 °C.
- Isolation I/O: 1500 VDC
- Features: reverse polarity protection and inrush current limiting (active), protection against overcurrent, overvoltage and high temperature
EMC:
- Conducted Emissions MIL-STD-461G, CE101/CE102
- Radiated Emissions MIL-STD-461G, RE101/RE102, Navy Mobile and Army.
- Immunity MIL-STD-461G, CS101/CS116/CS117; RS101/RS103, Criteria A
- MIL-STD-1275E, Spikes 250V for 100us, Criteria B
- Surge 100V for 50ms, Criteria A
- Load Dump DEF STAN 61-5 Part 6 Issue 6, Criteria B
Environmental requirements:
- Ambient temperature: -40 °C to + 85 °C* and -55 °C to 85 °C with screening
- Baseplate Temperature: -40 °C to 100 °C
- Humidity: 95% relative humidity; 240 hrs MIL-STD-810H, Method 507.2
- Vibration 5 to 500 Hz; MIL-STD-810H, Method 514.8
- Shock 40 G; MIL-STD-810H, Method 516.8
- Bump 2000 bumps in any direction at 40 G; MIL-STD-810H, Method 516.8
- Salt ambient air 48 hrs; MIL-STD-810H, Method 509.7
- Use up to 5000 m altitude
